Front Toe Adjustment

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Loosen the jam nut on the tie rod (2).

Fig 1: Adjusting Front Toe
Courtesy of GENERAL MOTORS CORP.
Rotate the inner tie rod (1) to the required toe specification setting. Refer to WHEEL ALIGNMENT SPECIFICATIONS .
NOTE: Refer to FASTENER NOTICE .
Tighten the jam nut on the tie rod.
Tighten

Tighten the front tie rod jam nut to 68 N.m (50 lb ft).
Check the toe setting after tightening.
Adjust the toe setting if necessary.