LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (HVAC Systems - Automatic) >> Repair Instructions >> Inside Air Temperature Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Instrument Panel Cluster (IPC) trim plate. Refer to TRIM PLATE BEZEL REPLACEMENT - IP CLUSTER in GAUGES AND INSTRUMENT PANEL .
  2. Remove the electrical connection at the air temperature sensor.
  3. Remove the air temperature sensor; disconnect the air temperature sensor from the aspirator duct.
    4. Fig 1: Air Temperature Sensor To The Aspirator Duct
    G01720059Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals