LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal & Installation >> Miscellaneous >> Accelerator Controls Cable Bracket >> Removal

Accelerator Controls Cable Bracket: Removal

  1. Disconnect the accelerator controls cable cross slug from the throttle body lever. See Figure . Disconnect the accelerator controls cable from the accelerator cable bracket. Disconnect the cruise control cable from the throttle lever and accelerator bracket, if applicable. See Figure .
  2. Disconnect the air cleaner intake duct from the throttle body. See AIR CLEANER INTAKE DUCT  under AIR INDUCTION SYSTEMS. Disconnect the wire harness from the retainer. Remove the nut and bolts holding the accelerator cable bracket to the throttle body. Remove the accelerator cable bracket.
scientia non olet · About LEMON Manuals