LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal & Installation >> Ignition Systems >> Ignition Coils >> Removal & Installation

Removal & Installation

  1. Turn ignition off. Disconnect the spark plug wires from the ignition coils. Note the position from which the wires are removed. Remove the 2 screws that secure the ignition coil to the ignition control module. Remove the ignition coil.
  2. To install, reverse removal procedure. Tighten the coil screws to specification. See TORQUE SPECIFICATIONS  . Connect the spark plug wires to the ignition coils. See Fig 1 .
Fig 1: Identifying Proper Spark Plug Routing At Ignition Coils
G00114733Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals