LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting Systems >> Repair Instructions >> Stop Lamp Switch Replacement >> Installation Procedure

Installation Procedure

  1. Install the stop lamp switch (1) into the slotted grooves until switch is fully depressed against the brake pedal (2), then turn the switch clockwise approximately 1/4 turn, the switch should now be installed and adjusted.
  2. Connect the electrical connectors.
  3. Install the left side instrument panel insulator. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT -- LEFT .
  4. If necessary, adjust the stop lamp switch. Refer to STOP LAMP SWITCH ADJUSTMENT  .
    Fig 1: Installing Stop Lamp Switch From Brake Pedal Bracket
    G01515423Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals