Conditions For Running DTC

DTCs P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0121, P0122, P0123, P0125, P0128, P0131, P0132, P0134, P0135, P0151, P0152, P0154, P0155, P0200, P0300, P0410, P0440, P0442, P0446, P0452, P0453, P1258, P1415, P1416, or P1441 are not set.
The loop status is Closed.
The engine run time is more than 160 seconds.
The engine speed is between 1000-2300 RPM.
The ignition 1 signal is between 9-18 volts.
The Engine Coolant Temperature (ECT) is more than 122°F (50°C).
The Evaporative (EVAP) emissions purge solenoid command is more than 0 percent.
The Mass Air Flow (MAF) sensor is between 20-50 g/s.
The Throttle Position (TP) sensor is more than 5 percent.
The fuel tank level remaining is more than 10 percent.
The conditions are met for 60 seconds.