Installation Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Prizm. However, it is still accessible from the selected car via links, so may be relevant.

Install the turn signal/headlamp switch (2) to the steering column. Secure the switch with the 2 screws (4).
Connect the turn signal/headlamp switch electrical connector (3).

Fig 1: Connecting Turn Signal/Headlamp Switch Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Install the steering column upper trim cover (2) to the vehicle. Secure the trim cover with the screw (3).

Fig 2: Installing Steering Column Upper Trim Cover
Courtesy of GENERAL MOTORS CORP.
Install the steering column lower trim cover (6) to the vehicle. Secure the trim cover with the 3 screws.

Fig 3: Installing Steering Column Lower Trim Cover
Courtesy of GENERAL MOTORS CORP.
Enable the SIR System. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM .

Fig 4: Installing Steering Column Lower Trim Cover

Courtesy of GENERAL MOTORS CORP.