Installation Procedure
- Install a new stud. Insert the wheel stud from the back side of the wheel hub and bearing (2).
Courtesy of GENERAL MOTORS CORP.
- Install 4 flat washers (3) on the wheel stud.
- Install the wheel nut (1) with the flat side toward the washers (3)
- Tighten the nut until the wheel stud is properly seated in the wheel hub flange (2).
- Remove the nut (1) and washers (3).
- Install the rotor. Refer to FRONT BRAKE ROTOR
.
- Install the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels
.
- Lower the vehicle.