Installation Procedure

Important:  The slit in the insulator (6) must face toward the front of the vehicle.

1. Install the stabilizer shaft insulators (6) over the stabilizer shaft (7), if necessary.
   Fig 1: Installing Stabilizer Shaft

   Courtesy of GENERAL MOTORS CORP.
2. Place the stabilizer shaft (7) into position on the vehicle.
3. Install the stabilizer shaft insulator clamps (5) over the insulators.
4. Install the stabilizer shaft insulator clamp bolts (4) and stud.

   Tighten 

   Tighten the stabilizer shaft insulator clamp bolts (4) and stud to 55 N.m (41 ft. lbs.).

5. Install the stabilizer shaft link. Refer to Stabilizer Shaft Link Replacement .
6. Lower the vehicle.