LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2002 >> Firebird Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Automatic Transmission Service) >> Adjustments >> Park/Neutral Position Switch >> Using Old Switch

Using Old Switch

WARNING: This page is about a different variant/trim than selected.
  1. Loosely, install the Park/Neutral position switch screws to the transmission control. See Figure .
  2. Ensure that the vehicle will only start in the Park or the Neutral position. Readjust the switch, if the vehicle will start in any other position.
  3. Insert a 0.094" (2.34 mm) gage pin into the service adjustment hole. See Figure . Slide the switch until the gage pin drops to 0.59" (15 mm) depth.
  4. Tighten the Park/Neutral position switch bolts to specification. See TORQUE SPECIFICATIONS  . Remove the gage pin and verify proper operation of the switch.
scientia non olet · About LEMON Manuals