Installation Procedure
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
Important:
- Ensure that the face of the pulley hub is flush with the end of the pump shaft.
- Do not use the arbor press to install the pulley.
- Use the J 25033-C in order to install the power steering pump pulley.
- Install the power steering pump to the engine.
Refer to POWER STEERING PUMP REPLACEMENT .
- Bleed the power steering system. Refer to BLEEDING THE POWER STEERING SYSTEM .
- Inspect the system for leaks. Refer to POWER STEERING FLUID LEAKS .