Rain Sensor Removal/Installation
WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- If the ignition switch is turned to the ON position after replacing a rain sensor with a new one, the rain sensor determines that there is no raindrops or dirt on the windshield and performs the initial setting. When replacing a rain sensor with a new one, thoroughly wipe off raindrops and dirt from the windshield.
- Disconnect the negative battery cable.
- Remove the rain sensor cover.
- Disconnect the rain sensor connector.
- Slide the tab in the direction of the arrow and remove the rain sensor.
- Install in the reverse order of removal.