LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2002 >> Aztek FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Shift Interlock Systems) >> Removal & Installation >> STOPLAMP Switch >> Installation

STOPLAMP Switch: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, 2002 Chevrolet RV Cutaway, and 2002 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Snap the stoplamp switch onto the pushrod to the power brake booster. Install the stoplamp switch with the pushrod on the brake pedal pin. See Fig 1 .
  2. Connect the electrical connector to the stoplamp switch. Connect the battery negative cable.
Fig 1: Removing & Installing Stoplamp Switch
G00079841Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals