LEMON Manuals
: Even more car manuals for everyone
Home
>>
Pontiac
>>
2002
>>
Aztek FWD
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 428 (Supplemental Inflatable Restraint System)
>>
Diagnostic Tests
>>
Connector Identification
Connector Identification
WARNING:
This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Refer to illustrations to identify SIR connector terminals. See
Fig 1
,
Fig 2
,
Fig 3
,
Fig 4
,
Fig 5
,
Fig 6
&
Fig 7
.
Fig 1: Identifying SDM Harness Connector Terminals
Courtesy of GENERAL MOTORS CORP.
Fig 2: Identifying Passenger-side Air Bag Module Connector Terminals
Courtesy of GENERAL MOTORS CORP.
Fig 3: Identifying Driver-side Air Bag Module Connector Terminals
Courtesy of GENERAL MOTORS CORP.
Fig 4: Identifying Right-side Front End Discriminating Sensor Connector Terminals
Courtesy of GENERAL MOTORS CORP.
Fig 5: Identifying Left-side Front End Discriminating Sensor Connector Terminals
Courtesy of GENERAL MOTORS CORP.
Fig 6: Identifying Front End Discriminating Circuit In-line Connector (C109) Terminals
Courtesy of GENERAL MOTORS CORP.
Fig 7: Identifying Passenger-side Air Bag Module Disable Switch Connector Terminals
Courtesy of GENERAL MOTORS CORP.