Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Vanity Mirror Lamp Lens Bulb

Courtesy of GENERAL MOTORS CORP.

Install the bulb into the socket.

Fig 2: Identifying Vanity Mirror Lamp Lens

Courtesy of GENERAL MOTORS CORP.

Position the vanity mirror lamp lens to the sunshade.
Align the lens tabs into the housing slots and insert the upper edge of the lens first.

Fig 3: Installing/Removing Vanity Mirror Lamp Lens

Courtesy of GENERAL MOTORS CORP.

Insert a small flat-bladed tool at the lower edge of the vanity mirror lamp lens then press up to fully install the lens.
Close the lamp cover door and raise the sunshade.