Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Install the fog lamp bulb to the fog lamp, turning clockwise, if required.
- Install the fog lamp to the front bumper fascia.
- Install the fog lamp nuts to the fog lamp.
Tighten: Tighten the fog lamp nuts to 10 N.m (89 lb in).
- Connect the electrical connector to the fog lamp.
- Lower the vehicle.
- Check and adjust the fog lamp aim as necessary. Refer to Fog Lamp Aiming Procedure .
NOTE:
Refer to Fastener Notice in Cautions and Notices.