LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> Suspension >> Rear Suspension System >> Removal & Installation >> Frame Mount >> Installation

Frame Mount: Installation

NOTE: Identify the orientation of the voids in the mounts and install the mounts with the voids fore and aft to the vehicle.
  1. Install new frame mounts using frame mount installer/receiver. With the help from an assistant guide the rear suspension module into place while the other raises the hoist. Install the rear suspension module mounting bolts.
  2. Connect electrical connector into ALC height sensor. To complete installation, reverse removal procedure. Torque all fasteners to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals