LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 943 (Engine Cooling System) >> Repair Instructions >> Coolant Pump Outlet Hose - Starter/Generator Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the starter/generator control module (SGCM) cooling system. Refer to Draining and Filling Cooling System - Starter/Generator Control Module .
  2. Remove the lower fan shroud. Refer to Fan Shroud Replacement - Lower .
  3. Remove the SGCM coolant pump outlet hose (5) from the clip (6).
    4. Fig 1: View Of SGMC Coolant Pump Components
    GM1206692Courtesy of GENERAL MOTORS CORP.
  4. Remove the SGCM coolant pump outlet hose (3) from the clip.
  5. Reposition the SGCM coolant pump outlet hose clamp (2) from the SGCM coolant pump (1).
  6. Remove the SGCM coolant pump outlet hose (3) from the SGCM coolant pump (1).
  7. Remove the SGCM coolant pump outlet hose (3) from the vehicle.
    8. Fig 2: View Of SGCM Coolant Pump, Outlet Hose Clamp & Hose
    GM1206677Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals