LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Automatic Transaxle Servicing) >> Removal & Installation >> Vehicle Speed Sensor >> Installation

Vehicle Speed Sensor: Installation

WARNING: This page is about a different car, the 2003 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean and dry the vehicle speed sensor.
  2. Install the vehicle speed sensor and the retaining stud. See Figure . Tighten the stud to specification. See TORQUE SPECIFICATIONS  .
  3. Install the electrical connector at the sensor.
  4. Remove the safety stands.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals