LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Automatic Transaxle Servicing) >> Removal & Installation >> Shift Control Cable >> Removal

Shift Control Cable: Removal

WARNING: This page is about a different car, the 2003 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the park brake and chock the wheels.
  2. Remove the cable (4) at the transaxle (2) shift control assembly (3). See Fig 1 .
  3. Remove the cable at the transaxle cable bracket. See Fig 2 .
  4. Remove the center console. See REMOVAL & INSTALLATION in appropriate SHIFT INTERLOCK SYSTEMS article.
  5. Remove the cable at the shift control assembly. See Fig 3 .
  6. Remove the cable grommet at the cowl.
  7. Remove the cable from the vehicle.
Fig 1: Identifying Shift Cable Components At Transaxle
G00088329Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing Cable At Transaxle Bracket
G00088330Courtesy of GENERAL MOTORS CORP.
Fig 3: Removing & Installing Cable Retainer Clip At Floor Shift Control
G00088331Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals