LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1468 (Hydraulic Brake System) >> Repair Instructions >> Master Cylinder Fluid Level Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Disconnecting/Connecting Brake Fluid Level Sensor Electrical Connector
    GM931316Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the brake fluid level sensor electrical connector.
    2. Fig 2: Removing/Installing Brake Fluid Level Sensor
    GM926579Courtesy of GENERAL MOTORS CORP.
  2. While simultaneously depressing the retaining tabs on the opposite side of the sensor electrical connection, carefully pull the sensor from the master cylinder reservoir.
  3. Remove the low brake fluid level sensor.
scientia non olet · About LEMON Manuals