LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1345 (Horn System) >> Repair Instructions >> Horn Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Horn & Radiator Support
    GM331104Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure that the black side of the horn is facing forward on the vehicle.
  1. Install the horn (2) to the radiator support (1). Left side and right side horn assemblies are shown.
    2. NOTE: Refer to FASTENER NOTICE .
  2. Install the horn bolt.

    Tighten:  Tighten the horn bolts to 9 N.m (80 lb in).

  3. Connect the horn electrical connector.
  4. Install the park/turn signal lamp assembly. Refer to PARK/TURN SIGNAL LAMP REPLACEMENT (EXCEPT AVALANCHE) or PARK/TURN SIGNAL LAMP REPLACEMENT (AVALANCHE) .
  5. Install the headlamp. Refer to HEADLAMP ASSEMBLY OR HEADLAMP BULB REPLACEMENT (EXCEPT AVALANCHE) or HEADLAMP ASSEMBLY OR HEADLAMP BULB REPLACEMENT (AVALANCHE) or HEADLAMP ASSEMBLY OR HEADLAMP BULB REPLACEMENT (ESCALADE) .
  6. Lower the hood.
scientia non olet · About LEMON Manuals