LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1220 (Body Front End) >> Repair Instructions >> Hood Link Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Hood, Hinge & Bolts
    GM385497Courtesy of GENERAL MOTORS CORP.
  1. Position the hood link assembly (6) to the vehicle.
    2. NOTE: Refer to FASTENER NOTICE .
  2. Install the bolt (5) holding the hood link assembly to the fender.

    Tighten:  Tighten the link assembly to the fender bolt to 25 N.m (18 lb ft).

  3. Install the fender bolt (7) holding the hood link assembly to the hood hinge.

    Tighten:  Tighten the hinge bolts to 25 N.m (18 lb ft).

scientia non olet · About LEMON Manuals