LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1090 (Transfer Case - STEYR) >> Repair Instructions >> Transfer Case Fluid Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Fill & Drain Plugs
    GM630583Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the drain plug (1) and gasket.

    Tighten:  Tighten the drain plug to 32 N.m (24 lb ft).

  2. Fill the transfer case with synthetic gear oil GM P/N United States 12378514 Canada P/N 88901045, or equivalent. Refer to Capacities - Approximate Fluid in General Information.
  3. Fill the transfer case to the bottom of the oil fill plug hole.
  4. Install the oil fill plug (2) and gasket.

    Tighten:  Tighten the oil fill plug to 28 N.m (21 lb ft).

  5. Lower the vehicle.
scientia non olet · About LEMON Manuals