LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1084 (Disc Brake System) >> Repair Instructions >> Disc Brake Hardware Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean all parts in clean, denatured alcohol.
  2. Dry with low pressure, non-lubricated, filtered air.
  3. Inspect the brake caliper bracket for cracks. If cracked, replace bracket.
  4. Lubricate the brake caliper pin bolt sleeves with high temperature silicone lubricant.
  5. Install the brake caliper bracket. Refer to Brake Caliper Bracket Replacement - Rear .
    6. Fig 1: View Of Brake Pads, Brake Pad Retainers, & Caliper Bracket
    GM727742Courtesy of GENERAL MOTORS CORP.
  6. Install the brake pad retainers (1) to the bracket caliper bracket (3).
  7. Install the brake pads (2) to the bracket caliper bracket (3).
  8. Install the brake caliper to the brake caliper bracket. Refer to Brake Caliper Replacement - Rear .
scientia non olet · About LEMON Manuals