LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1075 (Hydraulic Brake System) >> Repair Instructions >> Proportioning Valve Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to Brake Fluid Irritant Caution in Cautions and Notices.
NOTE: Refer to Brake Fluid Effects on Paint and Electrical Components Notice in Cautions and Notices.
IMPORTANT: Note the locations of the brake pipes in order to aid in installation.
    Fig 1: View Of Brake Pipes To Proportioning Valve
    GM886375Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the brake pipes from the proportion valve.
    2. Fig 2: Locating Master Cylinder Brake Pipes From Proportion Valve
    GM886395Courtesy of GENERAL MOTORS CORP.
  2. Remove Master Cylinder brake pipes from proportion valve.
  3. Remove the nuts that retain the proportion valve to the mounting bracket.
  4. Remove the proportion valve from the bracket.
scientia non olet · About LEMON Manuals