Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Position the energy absorber to the front bumper impact bar.

Fig 1: Identifying Front Bumper Energy Absorber (Aztek)
Courtesy of GENERAL MOTORS CORP.
Starting with the center hole, install the push-in retainers to the front bumper energy absorber.

Fig 2: View Of Front Bumper Energy Absorber Push-In Retainers (Aztek)
Courtesy of GENERAL MOTORS CORP.
Install the front bumper fascia. Refer to Fascia Replacement - Front Bumper - Upper (Aztek) or Fascia Replacement - Front Bumper - Upper (Rendezvous) .