LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1040 (Supplemental Inflatable Restraint System) >> Repair Instructions >> SIR Disabling and Enabling Zone 7 >> Disabling Procedure

Disabling Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Refer to SIR Service Precautions .
    Fig 1: Locating SIR Fuse
    GM628316Courtesy of GENERAL MOTORS CORP.
  1. Turn the steering wheel so that the vehicles wheels are pointing straight ahead.
  2. Turn OFF the ignition.
  3. Remove the key from the ignition switch.
  4. Remove the console accessory wiring junction block access hole cover.
    IMPORTANT: With the SIR Fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation, and does not indicate an SIR system malfunction.
  5. Remove the SIR Fuse.
    6. Fig 2: View Of CPA, Seat Belt Pretensioner Yellow Connector & Vehicle Harness Yellow Connector
    GM854382Courtesy of GENERAL MOTORS CORP.
  6. Remove both connector position assurance (CPA) (3) from the LF/driver side impact module yellow connector (1) which is located under the driver seat.
  7. Disconnect the vehicle harness yellow connector (2) from the LF side impact module yellow connector (1).
scientia non olet · About LEMON Manuals