LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling Fan >> Engine Cooling System >> Repair Instructions >> Fan Shroud Replacement >> Installation Procedure

Installation Procedure

  1. Install the heat shields to the cooling fan shroud.
    2. Fig 1: Installing Heat Shields To Cooling Fan Shroud
    G01745819Courtesy of GENERAL MOTORS CORP.
  2. Install the fan motors to the cooling fan shroud.
    NOTE: Refer to FASTENER NOTICE .
    Fig 2: Installing Fan Motors To Cooling Fan Shroud
    G01745820Courtesy of GENERAL MOTORS CORP.
  3. Install the screws to the cooling fan motor.

    Tighten

    Tighten the screws to 6 N.m (53 lb in).

  4. Connect the cooling fan motor electrical connectors.
  5. Install the cooling fans to the shroud.
    Fig 3: Installing Cooling Fans & Nuts To Shroud
    G01745821Courtesy of GENERAL MOTORS CORP.

    Important:  Turn the cooling fan nuts counterclockwise to tighten.

  6. Install the cooling fan nuts.

    Tighten

    Tighten the nuts to 6 N.m (53 lb in).

  7. Install the cooling fan assembly including the shroud. Refer to Cooling Fan Replacement - Electric .
scientia non olet · About LEMON Manuals