LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Repair Instructions >> Seat Replacement - Bucket >> Installation Procedure

Installation Procedure

  1. Install the front seat to the studs on the floor pan.
  2. Connect the seat electrical connectors.
    NOTE: Refer to FASTENER NOTICE .
  3. Install the nuts to the seat floor pan studs.

    Tighten 

    Tighten the front bucket seat adjuster-to-floor pan nuts to 50 N.m (37 lb ft).

    Inspect the front bucket seat for proper operation and adjustment.

  4. Enable the SIR system. Refer to ACTIVATING SYSTEM .
    Fig 1: Installing Front Seat Adjuster Nuts And Electrical Connectors
    G01722491Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals