Window Motor: Installation

CAUTION: Use correct fastener in correct location. Replacement fasteners must be correct part number for application. Fasteners requiring replacement or fasteners requiring use of thread locking compound or sealant are identified in service procedures. DO NOT use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage fastener. Use correct tightening sequence and specifications when installing fasteners in order to avoid damage to part and systems.

Install window regulator/motor assembly into door. Tighten front window regulator/motor-to-regulator screws to 53 INCH lbs. (6 N.m). Install harness connector. Tighten window/regulator motor-to-door bolts to 89 INCH lbs. (10 N.m). To complete installation, reverse removal procedure.