Adding Keys
NOTE:
When there is no learned master key (Black) available to perform adding keys procedure, 10-minute relearn procedure or 30-minute relearn procedure must be performed. Export vehicles require 2 learned master keys.
NOTE:
You may add up to 10 additional master (Black) keys or valet (Gray ) keys using this procedure when a learned master key is available. This procedure adds keys only and does not erase previously learned keys. Keys to be learned must duplicate the mechanical cut of current key. If more than one valet key is to be learned, immediately precede each valet key with a learned master key.
- With a previously learned master key, turn ignition switch to RUN position.
- Turn OFF the ignition and remove the key.
- Within 10 seconds insert key to be learned. Turn ignition switch to RUN position. Vehicle has now learned the new key. Repeat procedure for each additional key to be learned.