Code Enable Criteria

For DTC to run, the following conditions must be met for 2 seconds:

• DTCs P0107, P0108, P0117, P0118, P0121, P0122, P0123, P0125, P0506, P0507 are not set.
• ECT is more than 95°F (35°C).
• Engine speed is more than 1000 RPM.
• TP sensor angle is 5-100 percent.
• MAP is 40-100 kPa with A/C off.
• MAP is 45-100 kPa with A/C on.
• PCM detects vehicle speed at zero MPH for 100 seconds.

DTC will set when PCM detects vehicle speed at zero MPH for 100 seconds.