Code Enable Criteria

For DTC to run, the following conditions must be met for more than 2 seconds:

• DTCs P0102, P0103, P0106, P0107, P0108, P0121, P0122, P0123, P1121, or P1122 are not set.
• Engine is running.
• Ignition 1 signal is 11-18 volts.
• TP sensor angle is less than 95 percent.
• TP sensor angle is steady within a range of less than 5 percent.
• MAP sensor is less than 80 kPa.
• MAP sensor is steady within a range of less than 3 kPa.

DTC will set if MAF sensor is not within predetermined range of calculated MAF value for more than 8 seconds.