LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 959 (Power Steering System) >> Repair Instructions >> Power Steering Pulley Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the power steering pump pulley on the end of the power steering pump shaft.
  2. Install the power steering pump pulley using J 25033-C  .
    Fig 1: View Of Power Steering Pump Pulley Installer
    GM643361Courtesy of GENERAL MOTORS CORP.
  3. Ensure that the power steering pump pulley (1) is flush against the power steering pump shaft (2), with an allowable variance of 0.25 mm (0.010 in).
    Fig 2: Checking Power Steering Pump Pulley Installed Depth
    GM245012Courtesy of GENERAL MOTORS CORP.
  4. Install the drive belt. Refer to Drive Belt Replacement , Drive Belt Replacement - Accessory (4.8L, 5.3L, and 6.0L Engines) , Drive Belt Replacement - Accessory (5.3L Engine w/RPO HP2) , Drive Belt Replacement or Drive Belt Replacement - Accessory in Engine Mechanical.
  5. Install the upper fan shroud. Refer to Fan Shroud Replacement - Upper (W/O M74) , Fan Shroud Replacement - Upper (W/M74) or Fan Shroud Replacement - Upper (W/HP2) in Engine Cooling.
scientia non olet · About LEMON Manuals