LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 896 (Wiper System And Washer System) >> Repair Instructions >> Wiper Blade Element Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.

Important:  Replace the wiper blade element if it is removed from the wiper blade.

  1. Remove the wiper blade from the wiper arm.

    Refer to WIPER ARM BLADE REPLACEMENT .

  2. Remove the bottom claws (2) of the wiper blade (1) from the notches in the wiper blade element (3).
  3. Pull the wiper blade element (3) out through the wiper blade claws (2).
    Fig 1: Pulling Wiper Blade Element Out Through Wiper Blade Claws
    G01476417Courtesy of GENERAL MOTORS CORP.

scientia non olet · About LEMON Manuals