Removal Procedure
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection
- Depress the tab (1) retaining the engine control Module (2).
- Slide the engine control module (2) in order to disengage the engine control module bracket from the battery upper cover (3).
- Position the engine control module assembly (2) to the side. Do not disconnect the wiring harness.
- Release the two tabs (2).
- Remove the battery upper (1) cover from the battery lower cover (3).
- Loosen the positive battery cable retaining nut (2).
- Remove the positive battery cable from the battery (1).
- Remove the battery retaining bolt (2) and retainer block (3).
- Remove the battery (1) from the vehicle.