Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the SGCM coolant pump outlet hose (3) to the vehicle.
Install the SGCM coolant pump outlet hose (3) to the SGCM coolant pump (1).
Position the SGCM coolant pump outlet hose clamp (2) to the SGCM coolant pump (1).
Install the SGCM coolant pump outlet hose (3) to the clip.

Fig 1: View Of SGCM Coolant Pump, Outlet Hose Clamp & Hose

Courtesy of GENERAL MOTORS CORP.

Install the SGCM coolant pump outlet hose (5) to the clip (6).

Fig 2: View Of SGMC Coolant Pump Components

Courtesy of GENERAL MOTORS CORP.

Install the lower fan shroud. Refer to Fan Shroud Replacement - Lower .

NOTE: The procedure below must be followed. Improper coolant level could result in a low or high coolant level condition, causing starter/generator control module damage.

Fill the SGCM cooling system. Refer to Draining and Filling Cooling System - Starter/Generator Control Module .