Installation Procedure
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the receptacle electrical connections.
- Install the receptacle outlet (3) to the receptacle box (1).
- Install the receptacle outlet screws (2).
Tighten: Tighten the screws to 2 N.m (18 lb in).
- Connect the ESB. Refer to Energy Storage Box (ESB) Service Disconnect/Connect (5.3L Engine w/RPO HP2) in Engine Electrical.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.