LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 950 (Seat System) >> Repair Instructions >> Seat Switch Replacement - Power >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the power seat switch to bezel screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    2. Fig 1: Installing Power Seat Switch To Bezel Screws
    GM663330Courtesy of GENERAL MOTORS CORP.
    Fig 2: View Of Seat Switch Bezel
    GM389092Courtesy of GENERAL MOTORS CORP.
  2. Install the power seat switch bezel to the seat. Refer to Seat Switch Bezel Replacement .
scientia non olet · About LEMON Manuals