LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 941 (Engine Controls - 8.1L (Introduction)) >> Repair Instructions >> Air Cleaner Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the intake air resonator. Refer to Intake Air Resonator Replacement .
    Fig 1: View Of MAF/IAT Sensor Electrical Connectors
    GM750582Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the mass air flow/intake air temperature (MAF/IAT) sensor electrical connector (3).
    3. Fig 2: Air Cleaner Assembly
    GM334911Courtesy of GENERAL MOTORS CORP.
  3. Pull up on the air cleaner assembly (1) in order to release the retainers from the air cleaner adapter (2).
    4. Fig 3: View Of Air Cleaner Assembly, MAF/IAT Sensor & Clamp
    GM858230Courtesy of GENERAL MOTORS CORP.
  4. If necessary, loosen the MAF/IAT sensor clamp.
  5. Remove the MAF/IAT sensor.
scientia non olet · About LEMON Manuals