Vehicle Speed Sensor: Installation
WARNING: This page is about a different car, the 2002 GMC Sonoma, 2002 GMC Jimmy, 2002 Chevrolet S10 Pickup, and 2002 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
Install the speed sensor and NEW O-ring seal. See Fig 1. Coat the O-ring seal (3) with clean transmission fluid. Install and tighten the bolt to specification. See TORQUE SPECIFICATIONS . Install the harness connector. Lower the vehicle. Fill transmission with appropriate fluid to proper level. See LUBRICATION .