LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 847 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Link Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use a pry bar in order install the stabilizer shaft link insulators and the spacer.
  2. Install the stabilizer shaft link and insulators.
  3. Install the stabilizer shaft link bolt and nut.

    Tighten  Tighten the stabilizer shaft link nut to 23N.m(17lb ft).

  4. Lower the vehicle.
    Fig 1: Installing Stabilizer Shaft Link
    G01499515Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals