LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 809 (Seat System) >> Repair Instructions >> Seat Switch Bezel Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the power seat adjuster switch assembly to the seat switch bezel.
  2. Install the lumbar support switch to the seat switch bezel.
  3. Connect the electrical connectors.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the screws retaining the power seat switch bezel.

    Tighten 

    1. Tighten the screws to 2 N.m (18 lb in).
    Fig 1: Installing Screws Retaining Power Seat Switch Bezel
    G01459194Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals