Instrument Cluster Configuration
WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the WDS or equivalent to the DLC-2.
- Set up the WDS or equivalent (including the vehicle recognition).
- Select "Module Programming".
- Select "Programmable Module Installation".
- Select "IC" and perform procedures according to directions on the WDS or equivalent screen.
- Retrieve DTCs using the WDS or equivalent and verify that there is no DTC present.
- If any DTC is present, perform applicable DTC inspection. (See DIAGNOSTIC TROUBLE CODES TABLE [INSTRUMENT CLUSTER] .)