LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 706 (Seat System) >> Repair Instructions >> Seat Switch Replacement - Power >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector to the power seat switch.
    Fig 1: Installing Power Seat Switch
    G01780569Courtesy of GENERAL MOTORS CORP.
  2. Position the power seat switch to the seat cushion frame.
    CAUTION: Refer to FASTENER NOTICE .
  3. Install the power seat switch screws.

    Tighten 

    Tighten the screws to 3 N.m (27 lb in).

    Fig 2: Installing Power Seat Switch Screws
    G01780570Courtesy of GENERAL MOTORS CORP.
  4. Adjust the front seat cushion cover. Refer to Seat Cushion Cover Replacement - Front .
  5. Align the bezel to the power seat switch and press into place until fully seated.
  6. Adjust the front bucket seat to the original position.
    Fig 3: Installing Power Seat Switch Bezel
    G01780571Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals