LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 677 (Wiper System & Washer System) >> Repair Instructions >> Wiper Motor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the wiper motor onto the wiper transmission assembly with the 2 bolts. Tighten the 2 bolts to 8 N.m (71 lb in).
  2. Install the drive link onto the wiper motor crank arm with the J 39529. 
  3. Install the wiper transmission assembly on the vehicle with the 2 bolts. Tighten the 2 bolts to 9 N.m (80 lb in).
  4. Connect the electrical connector to the wiper motor.
  5. Install the reinforcement panel with the 4 bolts. Tighten the 4 bolts to 9 N.m (80 lb in).
  6. Install the air inlet grille panel.
  7. Install the wiper arms. Refer to Wiper Arm Replacement .
  8. Operate the wipers and check for proper operation.
scientia non olet · About LEMON Manuals