LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Wiper System And Washer System) >> Repair Instructions >> Washer Solvent Container Level Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the washer solvent container.
  2. Remove the right front fascia extension. Refer to FASCIA EXTENSION REPLACEMENT -- FRONT .
  3. Disconnect the electrical connector from the washer solvent level sensor.
    Fig 1: Disconnecting Electrical Connectors
    G01801004Courtesy of GENERAL MOTORS CORP.
  4. Remove the washer solvent level sensor from the washer solvent container.
    Fig 2: Removing Washer Solvent Level Sensor
    G01801005Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals