LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 659 (Power Seat System) >> Repair Instructions >> Seat Switch Bezel Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the power seat adjuster switch assembly to the seat switch bezel.
  2. Install the lumbar support switch to the seat switch bezel.
  3. Connect the electrical connectors.
    NOTE: Refer to FASTENER NOTICE .
    4. Fig 1: View Of Seat Switch Bezel
    GM389092Courtesy of GENERAL MOTORS CORP.
  4. Install the screws retaining the power seat switch bezel.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  5. Install the lumbar knob, if equipped. Refer to Lumbar Support Knob Replacement .
scientia non olet · About LEMON Manuals