LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 655 (Anti-Lock Brake System) >> Repair Instructions >> Wheel Speed Sensor Replacement (4WD) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the WSS (5) into the hub/bearing assembly (4).
  2. Install the WSS mounting bolt. Tighten the WSS mounting bolt to 18 N.m (13 lb ft).
  3. Install the WSS cable mounting clip to the knuckle.
  4. Install the WSS cable mounting clip to the upper control arm.
  5. Install the WSS cable mounting clip to the frame attachment point.
  6. Connect the WSS cable electrical connector.
  7. Install the brake rotor (2). Refer to BRAKE ROTOR .
  8. Install the tire and wheel.
  9. Perform the Diagnostic System Check - ABS .
scientia non olet · About LEMON Manuals